Redmi Note 8 (2021) MIUI 13 Android 12 Success

[GsmDost]

Please, put your device in OFF mode and insert USB cable
Waiting for MTK port : 137
HW Chip: MT6768
HW version: ca00
SW version: 00
HW sub version: 8a00
SEC_CFG_SBC_EN: true
SEC_CFG_SLA_EN: true
SEC_CFG_DAA_EN: true
MEID: 0x603C6B6435AFBDC594B5A3AB5DB510E4
Preloader name: preloader_k69v1_64
Send DA SYNC signal: OK
Setup device enviroment: OK
Receive DA SYNC signal: OK
USB_SPEED: HIGH-SPEED
Device mode: brom
Init EXT RAM: OK
INT_SRAM: 448.00 KB
EXT_RAM: 4.00 GB
Send 2nd DA: OK
CID: 90014A68433861503E031066A98AA781(hC8aP>)
EMMC_BOOT1: 4.00 MB
EMMC_BOOT2: 4.00 MB
EMMC_RPMB: 16.00 MB
EMMC_USER: 58.24 GB
Reading device Info
Brand: Redmi
Model: biloba
Marketname: Redmi Note 8 (2021)
Device: biloba
Manufacturer: Xiaomi
Mod device: biloba_global
Android version: 12
Android cpu: arm64-v8a
Incremental version: V13.0.6.0.SCUMIXM
Security patch: 2022-07-01
Read data
Backup security partition
Read Partition nvdata: OK
Read Partition nvram: OK
Backup Saved: Backup/xiaomi/patch_Redmi-Note-8-(2021)(biloba)-_2022_10_5_18_26_36.zip
Encrypting IMEI: OK
Performing Unlock bootloader
Unlock Bootloader: success
vbmeta verity: unlock
Patch cert: successful
Write security data: OK
New IMEIA: 3597
New IMEIB: 35974
Repair IMEI: successful
Be aware that the effect of this procedure lasts only until the system is unchanged. Doing a firmware update or an OTA update likely causes the phone to restore to its original state.
Operation time: 00:36
Operation: Finish 3.0.4.9

 

[Hekim]

Please, put your device in OFF mode and insert USB cable
Waiting for MTK port : 137
HW Chip: MT6768
HW version: ca00
SW version: 00
HW sub version: 8a00
SEC_CFG_SBC_EN: true
SEC_CFG_SLA_EN: true
SEC_CFG_DAA_EN: true
MEID: 0x603C6B6435AFBDC594B5A3AB5DB510E4
Preloader name: preloader_k69v1_64
Send DA SYNC signal: OK
Setup device enviroment: OK
Receive DA SYNC signal: OK
USB_SPEED: HIGH-SPEED
Device mode: brom
Init EXT RAM: OK
INT_SRAM: 448.00 KB
EXT_RAM: 4.00 GB
Send 2nd DA: OK
CID: 90014A68433861503E031066A98AA781(hC8aP>)
EMMC_BOOT1: 4.00 MB
EMMC_BOOT2: 4.00 MB
EMMC_RPMB: 16.00 MB
EMMC_USER: 58.24 GB
Reading device Info
Brand: Redmi
Model: biloba
Marketname: Redmi Note 8 (2021)
Device: biloba
Manufacturer: Xiaomi
Mod device: biloba_global
Android version: 12
Android cpu: arm64-v8a
Incremental version: V13.0.6.0.SCUMIXM
Security patch: 2022-07-01
Read data
Backup security partition
Read Partition nvdata: OK
Read Partition nvram: OK
Backup Saved: Backup/xiaomi/patch_Redmi-Note-8-(2021)(biloba)-_2022_10_5_18_26_36.zip
Encrypting IMEI: OK
Performing Unlock bootloader
Unlock Bootloader: success
vbmeta verity: unlock
Patch cert: successful
Write security data: OK
New IMEIA: 3597
New IMEIB: 35974
Repair IMEI: successful
Be aware that the effect of this procedure lasts only until the system is unchanged. Doing a firmware update or an OTA update likely causes the phone to restore to its original state.
Operation time: 00:36
Operation: Finish 3.0.4.9

orginal nv data şartıyla mı?