Hyperos bootloader hatası

Turkgsm

Turkgsm

New member
Katılım
16 Haz 2022
Mesajlar
17
Tepki puanı
12
Puanları
3
Konum
Mugla
Micommunity uygulamasini en az 1 ay once kurup sure aldim fakat denememe ragmen hala hesap eklemiyor çozumu nedir dostlar
 
Turkgsm

Turkgsm

New member
Katılım
16 Haz 2022
Mesajlar
17
Tepki puanı
12
Puanları
3
Konum
Mugla
Sorun bu
 

Ekli dosyalar

  • Picsart_24-07-12_16-19-17-805.jpg
    Picsart_24-07-12_16-19-17-805.jpg
    694.4 KB · Görüntüleme: 53
Hostekibi

Hostekibi

Yönetici
Katılım
16 Eyl 2023
Mesajlar
58
Tepki puanı
12
Puanları
8
Konum
Taipei
Xiaomi HyperOS Bootloader Açma Rehberi:

Ön Gereklilikler:

  • En az 30 günlük bir Xiaomi hesabına sahip olmalısınız. Eğer hesabınız yoksa, yeni bir hesap açacaksanız 30 gün beklemeniz gerekecektir. Daha önce mevcut olan bir hesabınız varsa bunu kullanabilirsiniz. Fakat unutmayın bir hesabın aylık bootloader kilidi açma sınırı vardır. Çok fazla cihazda aynı hesabı kullanamazsınız.
Adım 1: Xiaomi Topluluğu Uygulamasını Güncelleme

  • Xiaomi Topluluğu uygulamasını 5.3.31 veya daha üst bir sürüme güncelleyin. Bu yazıyı yazdığımız anda Google Play Güncel sürümü 5.3.30 bu yüzden uygulamanız alt bir sürümde ise bu
    Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
    APK dosyasını indirebilir ve kurabilirsiniz.
Adım 2: Bölge Ayarlarını Değiştirme

  • Uygulamada "Ben" kısmına gidin ve "Ayarlar > Bölgeyi Değiştir" seçeneğine tıklayarak bölgenizi "Global" olarak ayarlayın.
Adım 3: Bootloader Kilidini Açma

  • "Ben" bölümünden "Önyükleyici Kilidini Aç" seçeneğine tıklayın. Bu seçenek hemen görünmeyebilir; eğer görmüyorsanız, uygulamayı kapatıp bir süre bekleyin, ardından tekrar deneyin.
Adım 4: Başvuru Yapma

  • "Kilit Açma İçin Başvurun" seçeneğine tıklayın. Eğer Örneğin "15/07/2024 tarihine erişim izni aldınız" uyarısı alırsanız, burada tarih değişiklik gösterebilir. Örnek olsun diye böyle bir tarih yazdık, tarih aldıysanız işleminiz tamamdır. Ancak, "Uygulama kotasına ulaşıldı" uyarısı alırsanız, akşam 19:00'da tekrar deneyin. Çin saatine göre olduğu için size 00:00 diyebilir.
Adım 5: Geliştirici Seçeneklerini Açma

  • Ayarlar > Telefon Hakkında bölümüne gidin ve OS Sürümü kısmına 8-10 kez dokunun. Geliştirici seçenekleri açılacaktır.
  • Ardından Ayarlar > Ek Ayarlar > Geliştirici Seçenekleri'ne gidin ve "Mi Kilit Açma Durumu"na tıklayarak hesabınızı ekleyin. Eğer başarı ile eklendi uyarısı alırsanız, 72 saat (3 gün) sonra Mi Unlock uygulamasını kullanarak bilgisayar üzerinden bootloader'ı açabilirsiniz.
Bu adımları takip ederek Xiaomi cihazınızdaki HyperOS bootloader'ını başarıyla açabilirsiniz. Unutmayın ki her adımın düzgün bir şekilde tamamlanması önemlidir ve bazı adımların etkili olabilmesi için belirli bir süre beklemeniz gerekebilir.

NOT: Bootloader kilidi açma işlemi telefonunuzdaki tüm verileri silecektir. Bu yüzden işlemden önce yedek almanız önerilir.
 
V

volcanius

New member
Katılım
10 Tem 2024
Mesajlar
2
Tepki puanı
0
Puanları
1
Konum
izmir
cihaziniz Cin rom ve hyperos ile yuklu geldiyse acilmaz. miui den gectiyseniz bootloader unlock bypass yazin google a, xda forumunda gerekli dosyalar ve aciklama var.
 
marafafaisal27

marafafaisal27

New member
Katılım
21 Ağu 2024
Mesajlar
9
Tepki puanı
1
Puanları
1
Konum
Nigeria
Hostekibi' Alıntı:
Xiaomi HyperOS Bootloader Unlocking Guide:

Prerequisites:

  • You must have a Xiaomi account that is at least 30 days old. If you do not have an account, you will have to wait 30 days to open a new account. If you have an existing account, you can use it. But remember, an account has a monthly bootloader unlock limit. You cannot use the same account on too many devices.
Step 1: Update Xiaomi Community App

  • Update Xiaomi Community app to version 5.3.31 or higher. At the time of writing this article, Google Play Current version is 5.3.30, so if your app is in a lower version, you can download and install the APK file from this
    Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
    .
Step 2: Change Region Settings

  • Go to the "Me" section in the app and set your region to "Global" by clicking "Settings > Change Region".
Step 3: Unlock Bootloader

  • Under "Me", click "Unlock Bootloader". This option may not appear immediately; if you don't see it, close the app and wait a while, then try again.
Step 4: Applying

  • Click on "Apply for Unlock". For example, if you get a warning that "You have been granted access to 15/07/2024", the date may vary here. We wrote such a date as an example, if you have received a date, your transaction is complete. However, if you get a warning that "Application quota reached", try again at 19:00 in the evening. Since it is according to Chinese time, it may tell you 00:00.
Step 5: Open Developer Options

  • Go to Settings > About Phone and tap on OS Version 8-10 times. Developer options will open.
  • Then go to Settings > Additional Settings > Developer Options and add your account by clicking on "Mi Unlock Status". If you get a successful added alert, you can unlock the bootloader via computer using the Mi Unlock app after 72 hours (3 days).
By following these steps, you can successfully unlock the HyperOS bootloader on your Xiaomi device. Remember, it is important to complete each step properly and you may need to wait for a certain amount of time for some steps to take effect .

NOTE : Unlocking the bootloader will delete all data on your phone. Therefore, it is recommended to take a backup before the process.
Genişletmek için tıklayın ...
Please how can I unlock redmi 13c bootloader instantly at once without waiting
 
Hostekibi

Hostekibi

Yönetici
Katılım
16 Eyl 2023
Mesajlar
58
Tepki puanı
12
Puanları
8
Konum
Taipei

Unlock Bootloader on Redmi 13C - MIUI​

1717245554717-png.6108965


Downloads
Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.

Prerequisites​

  1. Backup Your Data: Unlocking the bootloader will erase all the data on your device. Ensure you back up important data.
  2. Enable Developer Options:
    • Go to Settings > About phone.
    • Tap on MIUI version 7 times until you see the message "You are now a developer".
  3. Enable OEM Unlocking and USB Debugging:
    • Go to Settings > Additional settings > Developer options.
    • Enable OEM unlocking and USB debugging.
  4. MI Account:
    • Please use ensure that you use a working SIM card in order to sign in, into your MI account.
    • Then ensure your device is connected to a MI account.
  5. Stable Internet Connection: Make sure your PC and device have a stable internet connection throughout the process.

Steps to Unlock the Bootloader​

  1. Download the MI Unlock Tool:
    • Visit the official MI Unlock Tool download page:
      Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
      .
    • Download and extract the tool on your PC.
  2. Log into MI Account on Unlock Tool:
    • Open the MI Unlock Tool on your PC.
    • Log in with the same MI account that is linked to your Redmi 13C.
  3. Power Off and Enter Fastboot Mode:
    • Power off your Redmi 13C.
    • Press and hold the Volume Down button and the Power button simultaneously to enter Fastboot mode.
    • Connect your device to the PC using a USB cable.
  4. Connect Device to MI Unlock Tool:
    • The MI Unlock Tool should detect your device. If not, ensure that the necessary drivers are installed.
    • 1717233439151-png.6108890
    • Start the Unlock Process:
      • Click on the Unlock button in the MI Unlock Tool.
      • Read the disclaimer and warnings, then confirm to proceed.
      • 1717233456555-png.6108891
      • The tool will start the unlocking process, which may take a few minutes.
      • If this is your first attempt, you might encounter a waiting period (up to 168 hours). The tool will notify you if you need to wait. If this happens, reattempt the unlocking process after the specified period.
      • 1717233595981-png.6108892
        1. Reboot Your Device:
          • Once the unlocking process is complete, your device will reboot automatically.
          • If it doesn’t, you can manually reboot by pressing and holding the Power button.

      • Post-Unlock Steps​

        1. Set Up Your Device:
          • After unlocking, your device will perform a factory reset. Set up your device as you would for a new phone.
          • Re-enable Developer options and USB debugging if needed.
        2. Verify Bootloader Status:
          • To confirm that the bootloader is unlocked, go to Settings > Additional settings > Developer options.
          • You should see OEM unlocking as enabled and the status should indicate that the bootloader is unlocked.
          • 1717233617360-png.6108894

          • Important Notes​

            • Warranty: Unlocking the bootloader may void your warranty. Check with the manufacturer for specific warranty terms.
            • Security: With the bootloader unlocked, your device may be more vulnerable to security threats. Be cautious about the apps and ROMs you install.
          • By following these steps, you should be able to unlock the bootloader on your Redmi 13C using the official MI Unlock Tool. Enjoy the enhanced customization and control over your device!
 
marafafaisal27

marafafaisal27

New member
Katılım
21 Ağu 2024
Mesajlar
9
Tepki puanı
1
Puanları
1
Konum
Nigeria
Hostekibi' Alıntı:

Unlock Bootloader on Redmi 13C - MIUI​

1717245554717-png.6108965


Downloads
Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.

Prerequisites​

  1. Backup Your Data: Unlocking the bootloader will erase all the data on your device. Ensure you back up important data.
  2. Enable Developer Options:
    • Go to Settings > About phone.
    • Tap on MIUI version 7 times until you see the message "You are now a developer".
  3. Enable OEM Unlocking and USB Debugging:
    • Go to Settings > Additional settings > Developer options.
    • Enable OEM unlocking and USB debugging.
  4. MI Account:
    • Please use ensure that you use a working SIM card in order to sign in, into your MI account.
    • Then ensure your device is connected to a MI account.
  5. Stable Internet Connection: Make sure your PC and device have a stable internet connection throughout the process.

Steps to Unlock the Bootloader​

  1. Download the MI Unlock Tool:
    • Visit the official MI Unlock Tool download page:
      Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
      .
    • Download and extract the tool on your PC.
  2. Log into MI Account on Unlock Tool:
    • Open the MI Unlock Tool on your PC.
    • Log in with the same MI account that is linked to your Redmi 13C.
  3. Power Off and Enter Fastboot Mode:
    • Power off your Redmi 13C.
    • Press and hold the Volume Down button and the Power button simultaneously to enter Fastboot mode.
    • Connect your device to the PC using a USB cable.
  4. Connect Device to MI Unlock Tool:
    • The MI Unlock Tool should detect your device. If not, ensure that the necessary drivers are installed.
    • 1717233439151-png.6108890
    • Start the Unlock Process:
      • Click on the Unlock button in the MI Unlock Tool.
      • Read the disclaimer and warnings, then confirm to proceed.
      • 1717233456555-png.6108891
      • The tool will start the unlocking process, which may take a few minutes.
      • If this is your first attempt, you might encounter a waiting period (up to 168 hours). The tool will notify you if you need to wait. If this happens, reattempt the unlocking process after the specified period.
      • 1717233595981-png.6108892
        1. Reboot Your Device:
          • Once the unlocking process is complete, your device will reboot automatically.
          • If it doesn’t, you can manually reboot by pressing and holding the Power button.

      • Post-Unlock Steps​

        1. Set Up Your Device:
          • After unlocking, your device will perform a factory reset. Set up your device as you would for a new phone.
          • Re-enable Developer options and USB debugging if needed.
        2. Verify Bootloader Status:
          • To confirm that the bootloader is unlocked, go to Settings > Additional settings > Developer options.
          • You should see OEM unlocking as enabled and the status should indicate that the bootloader is unlocked.
          • 1717233617360-png.6108894

          • Important Notes​

            • Warranty: Unlocking the bootloader may void your warranty. Check with the manufacturer for specific warranty terms.
            • Security: With the bootloader unlocked, your device may be more vulnerable to security threats. Be cautious about the apps and ROMs you install.
          • By following these steps, you should be able to unlock the bootloader on your Redmi 13C using the official MI Unlock Tool. Enjoy the enhanced customization and control over your device!
Genişletmek için tıklayın ...
Thanks alot bro
 
marafafaisal27

marafafaisal27

New member
Katılım
21 Ağu 2024
Mesajlar
9
Tepki puanı
1
Puanları
1
Konum
Nigeria
Hostekibi' Alıntı:

Unlock Bootloader on Redmi 13C - MIUI​

1717245554717-png.6108965


Downloads
Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.

Prerequisites​

  1. Backup Your Data: Unlocking the bootloader will erase all the data on your device. Ensure you back up important data.
  2. Enable Developer Options:
    • Go to Settings > About phone.
    • Tap on MIUI version 7 times until you see the message "You are now a developer".
  3. Enable OEM Unlocking and USB Debugging:
    • Go to Settings > Additional settings > Developer options.
    • Enable OEM unlocking and USB debugging.
  4. MI Account:
    • Please use ensure that you use a working SIM card in order to sign in, into your MI account.
    • Then ensure your device is connected to a MI account.
  5. Stable Internet Connection: Make sure your PC and device have a stable internet connection throughout the process.

Steps to Unlock the Bootloader​

  1. Download the MI Unlock Tool:
    • Visit the official MI Unlock Tool download page:
      Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
      .
    • Download and extract the tool on your PC.
  2. Log into MI Account on Unlock Tool:
    • Open the MI Unlock Tool on your PC.
    • Log in with the same MI account that is linked to your Redmi 13C.
  3. Power Off and Enter Fastboot Mode:
    • Power off your Redmi 13C.
    • Press and hold the Volume Down button and the Power button simultaneously to enter Fastboot mode.
    • Connect your device to the PC using a USB cable.
  4. Connect Device to MI Unlock Tool:
    • The MI Unlock Tool should detect your device. If not, ensure that the necessary drivers are installed.
    • 1717233439151-png.6108890
    • Start the Unlock Process:
      • Click on the Unlock button in the MI Unlock Tool.
      • Read the disclaimer and warnings, then confirm to proceed.
      • 1717233456555-png.6108891
      • The tool will start the unlocking process, which may take a few minutes.
      • If this is your first attempt, you might encounter a waiting period (up to 168 hours). The tool will notify you if you need to wait. If this happens, reattempt the unlocking process after the specified period.
      • 1717233595981-png.6108892
        1. Reboot Your Device:
          • Once the unlocking process is complete, your device will reboot automatically.
          • If it doesn’t, you can manually reboot by pressing and holding the Power button.

      • Post-Unlock Steps​

        1. Set Up Your Device:
          • After unlocking, your device will perform a factory reset. Set up your device as you would for a new phone.
          • Re-enable Developer options and USB debugging if needed.
        2. Verify Bootloader Status:
          • To confirm that the bootloader is unlocked, go to Settings > Additional settings > Developer options.
          • You should see OEM unlocking as enabled and the status should indicate that the bootloader is unlocked.
          • 1717233617360-png.6108894

          • Important Notes​

            • Warranty: Unlocking the bootloader may void your warranty. Check with the manufacturer for specific warranty terms.
            • Security: With the bootloader unlocked, your device may be more vulnerable to security threats. Be cautious about the apps and ROMs you install.
          • By following these steps, you should be able to unlock the bootloader on your Redmi 13C using the official MI Unlock Tool. Enjoy the enhanced customization and control over your device!
Genişletmek için tıklayın ...
Did i have to flash v14.0.6.0 before unlocking bl or is after I unlock bl that I will flash the phone v14.0.6 thanks
 
marafafaisal27

marafafaisal27

New member
Katılım
21 Ağu 2024
Mesajlar
9
Tepki puanı
1
Puanları
1
Konum
Nigeria
Hostekibi' Alıntı:

Unlock Bootloader on Redmi 13C - MIUI​

1717245554717-png.6108965


Downloads
Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.

Prerequisites​

  1. Backup Your Data: Unlocking the bootloader will erase all the data on your device. Ensure you back up important data.
  2. Enable Developer Options:
    • Go to Settings > About phone.
    • Tap on MIUI version 7 times until you see the message "You are now a developer".
  3. Enable OEM Unlocking and USB Debugging:
    • Go to Settings > Additional settings > Developer options.
    • Enable OEM unlocking and USB debugging.
  4. MI Account:
    • Please use ensure that you use a working SIM card in order to sign in, into your MI account.
    • Then ensure your device is connected to a MI account.
  5. Stable Internet Connection: Make sure your PC and device have a stable internet connection throughout the process.

Steps to Unlock the Bootloader​

  1. Download the MI Unlock Tool:
    • Visit the official MI Unlock Tool download page:
      Ziyaretçiler için gizlenmiş link,görmek için Giriş yapın veya üye olun.
      .
    • Download and extract the tool on your PC.
  2. Log into MI Account on Unlock Tool:
    • Open the MI Unlock Tool on your PC.
    • Log in with the same MI account that is linked to your Redmi 13C.
  3. Power Off and Enter Fastboot Mode:
    • Power off your Redmi 13C.
    • Press and hold the Volume Down button and the Power button simultaneously to enter Fastboot mode.
    • Connect your device to the PC using a USB cable.
  4. Connect Device to MI Unlock Tool:
    • The MI Unlock Tool should detect your device. If not, ensure that the necessary drivers are installed.
    • 1717233439151-png.6108890
    • Start the Unlock Process:
      • Click on the Unlock button in the MI Unlock Tool.
      • Read the disclaimer and warnings, then confirm to proceed.
      • 1717233456555-png.6108891
      • The tool will start the unlocking process, which may take a few minutes.
      • If this is your first attempt, you might encounter a waiting period (up to 168 hours). The tool will notify you if you need to wait. If this happens, reattempt the unlocking process after the specified period.
      • 1717233595981-png.6108892
        1. Reboot Your Device:
          • Once the unlocking process is complete, your device will reboot automatically.
          • If it doesn’t, you can manually reboot by pressing and holding the Power button.

      • Post-Unlock Steps​

        1. Set Up Your Device:
          • After unlocking, your device will perform a factory reset. Set up your device as you would for a new phone.
          • Re-enable Developer options and USB debugging if needed.
        2. Verify Bootloader Status:
          • To confirm that the bootloader is unlocked, go to Settings > Additional settings > Developer options.
          • You should see OEM unlocking as enabled and the status should indicate that the bootloader is unlocked.
          • 1717233617360-png.6108894

          • Important Notes​

            • Warranty: Unlocking the bootloader may void your warranty. Check with the manufacturer for specific warranty terms.
            • Security: With the bootloader unlocked, your device may be more vulnerable to security threats. Be cautious about the apps and ROMs you install.
          • By following these steps, you should be able to unlock the bootloader on your Redmi 13C using the official MI Unlock Tool. Enjoy the enhanced customization and control over your device!
Genişletmek için tıklayın ...
I try you method of redmi 13c unlock bootloader with all the tools given in your discretion but I was not successful is still giving me hours or did I lost something
 
Yanıt için giriş yapmanız veya üye olmanız gerekir.
Üst